Furuno GP-3500 - Manual (Page 20)

1. BASIC OPERATION
1-10
1.5 Selecting a Display
Five screen displays are available: Plotter, Pilot, Navigation, Compass and
Sounder. In addition to the full-screen display, you can divide the screen into
half-screen combination displays.
1. Press the [DISP] key.
A DISPLAY MODE screen appears. There are four pages for the DISPLAY
MODE screen.
DISPLAY MODE
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
2. PLOTTER
NAV INFO 1 3. PLOTTER
NAV INFO 2
4. PILOT 5. PILOT
NAV INFO 1 6. PILOT
NAV INFO 2
7. COMPASS
PLOTTER 8. COMPASS
PILOT 9. GPS STATUS
1. PLOTTER
DISPLAY MODE screen
2. Press appropriate numeric key to choose a display.
Selected display replaces display made page
Note: The DISPLAY MODE screen can store a total of nine displays. You may
program the DISPLAY MODE screen as desired. See paragraph 9.6.1.