Furuno GP-3500 - Manual (Page 142)

9. CUSTOMIZING YOUR UNIT
9-30
9.6.2 Setting the navigation data window
The navigation data window appears at the top of the PLOTTER (or PILOT) NAV
INFO 1 display and PLOTTER (or PILOT) NV INFO 2 display. You may select
the data to display and where to display it as follows:
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [4] key to show the DISPLAY MODES & NAV DATA WINDOW
SETUP menu.
4. Press the [2] key to show the NAVIGATION DATA WINDOW SETUP menu.
0-4-2. NAVIGATION DATA WINDOW SETUP
NAV INFO 1 NAV INFO 2 GOTO INFO1 GOTO INFO2
TURN KNOB TO SELECT NAV DATA AND PRESS KNOB TO ENTER.
Navigation data window setup menu
5. Roll the trackball in left-right direction to select a display title.
NAV INFO1: Window shown on NAV INFO1 display.
NAV INFO2: Window shown on NAV INFO2 display.
GOTO INFO1: Window shown when a destination is set at NAV INFO1
display.
GOTO INFO2: Window shown when a destination is set at NAV INFO2
display.
6. Rotate the [ENTER] knob to select a display pattern, and then press the
[ENTER] knob.