Furuno GP-3500 - Manual (Page 48)

3. TRACKS
3-6
3.2.1 Displaying own ship’s track while track plotting is stopped
You can show or hide own ship’s track on the PLOTTER (or PILOT) display
while track plotting is stopped.
1. Press the [MENU] key to show the main menu.
2. Press the [4] key to show the MARKS/SHIP’S TRACKS SETUP menu.
3. If PAGE 2/2 appears, rotate the [ENTER] knob clockwise to select
“PREVIOUS PAGE.”
4. Rotate the [ENTER] knob to choose “DISP TRACKS (HOLD).”
5. Press the [1] key to choose ON or the [2] key to choose OFF as appropriate
ON: Own ship’s track is displayed while recording is stopped. In this case own
ship’s track is not recorded; it is erased when it goes off screen or when the
power is turned off.
OFF: Own ship’s track is not displayed while recording is stopped.
Set to "ON"
Stopping
Resumed
Own Ship
Display enlarged
Display shrunk
Track
disappears.
Own Ship
Resumed
Stopped
Display while stopping recording of track
(When “ON” is selected at step 5 above)
5. Press the [MENU] key several times to close the menu.