Charge and insert battery – Fluke Ti50 User Manual
Page 16
Ti40, Ti45, Ti50, Ti55
Users Manual
1-6
Table 1-1. Standard Accessories
Number Description
A
Portable Infrared Camera with Lens Cap
B
Camera Carrying Case
C
LCD Cleaning Cloth
D
AC adapters (2)
E
Auxiliary AC Power Supply (Ti45 and Ti55 only)
F
AC Patch Cord
G
Neck Strap
H
Video Cable
I
AC Power Supply
J
Battery Charger
K
Compact Flash Memory Card with PCMCIA Adapter
L
Two Rechargeable Batteries
M
Compact Flash Memory Card Reader with USB Adapter
N
Getting Started Guide
O
SmartView Software CD with complete users manuals
P
Compact Flash Software CD
Charge and Insert Battery
Charge the batteries for 3 hours before use. Use only the rechargeable batteries
supplied. A battery is fully charged when the green LED light on the charger
remains solid.
Insert the charged battery into the slot on the bottom of the camera as shown in
Figure 1-2.
Note
You may use the auxiliary AC power supply to connect the camera to
a working AC outlet until at least one of the batteries is charged.