Fluke Ti50 - Manual (Page 90)

Ti40, Ti45, Ti50, Ti55
Users Manual
8-6
To change the standby to off timeout time:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Power tab and tap E.
5. Position the pointer over the Standby To Off Timeout down arrow and
press E.
6. Position the pointer over the time you want and press E.
7. Tap the TRIGGER button to accept setting change and return to scan
target mode.