Fluke Ti50 - Manual (Page 77)

7-1
Chapter 7
Advanced Operation
Enhancing the Image
You can use the image enhancement function to improve image clarity in live
scan targets and images saved while this function is enabled. Image quality
improves with each increase in image enhancement; however, response times
are reduced accordingly, for example, images set to “Normal” image
enhancement refresh a screen at a faster update rate than images set to “High.”
Note
Higher settings are more likely to show blurring on moving targets.
Image enhancement cannot be applied to images after they are
paused or saved. To use image enhancement, be sure to enable the
function prior to scanning target areas and saving images.
To adjust the image enhancement level:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Image Settings on
the popup menu and tap E.
3. Position the pointer over “None,” “Normal,” “Medium,” or “High” and
tap E.
4. Tap the TRIGGER button to accept setting change and return to scan
target mode.