Fluke Ti50 - Manual (Page 86)

Ti40, Ti45, Ti50, Ti55
Users Manual
8-2
Using Other Lenses
Your Camera comes standard with an f 0.8 20 mm focal length lens, which is
appropriate for most applications. The lens is made of Germanium crystal and
is antireflection coated for high transmission in the 8 to 14 micron wavelength
band. Two additional lenses are available: a wide angle f 0.8 10.5 mm focal
length lens to capture larger targets at short distances and a narrow angle f 1.0
54 mm focal length lens to capture small targets at long distances.
When you change lenses, you must change the lens selection setting
accordingly as described in Chapter 6.
For more information on ordering additional lenses or other accessories, visit
www.fluke.com.
Viewing Camera and Battery Information
The Info tab within the Camera Info window contains the camera serial
number, software versions, lens descriptions of each lens used (if more than
one), calibration range, number of image files on the memory card, and the
used and free space on the memory card.
To view the Info tab information:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Info on the
popup menu and tap E.
3. Position the pointer over the Info tab and tap E.
4. Position the pointer over the up/down arrows to scroll and see additional
details.
5. Tap the TRIGGER button to return to scan target mode.