Fluke Ti50 - Manual (Page 35)

Camera Overview
Programming Function Buttons
2
2-11
Table 2-3. Programmable Functions (cont.)
Laser—Used to help you correlate what is on the camera display
screen with what you are looking at (IR Fusion models only). The
laser spot is visible in the control image and can be a valuable
reference point for later image review.
Start Sequence—Used to quickly start the Auto Capture sequence.
(Auto Capture is available on Ti45 and Ti55 models only.)
Stop Sequence—Used to quickly stop the Auto Capture image
capture sequence.
(Auto Capture is available on Ti45 and Ti55 models only.)
Image Enhancement—Used to quickly cycle through the image
enhancement settings: “Off,” “Normal,” “Medium,” and “High.” Each
time you press the function button, the next setting takes affect.
Picture-in-Picture—Used to quickly switch between full screen view
and picture-in-picture view (IR Fusion models only).
Recalibrate—Used to manually trigger an internal calibration
adjustment.
To program buttons A, B, and/or C:
1. Use the MOUSE controller to position the pointer over the function icon
on the display screen task bar (A, B, C) you wish to program.
2. Tap E. A popup menu with list of programmable tasks appears.
3. Position the pointer over the desired task and select.
4. Repeat Steps 1-3.