Fluke Ti50 - Manual (Page 21)

Introduction
Capturing an Image
1
1-11
F2
F2
F3
Level & Span
Mouse Controller
eii007.eps
Figure 1-7. Setting the Fusion Blend Level
Capturing an Image
1. Tap the TRIGGER button once (shown in Figure 1-8) to pause the
live image.
2. Review the image and camera settings.
3. Press and hold the TRIGGER button for 2 seconds to capture (save) the
image. The image file name appears in the upper left-hand corner of the
display screen indicating the image is saved on the memory card.
Note
The memory card must be inserted into the camera to save and store
images.
4. Tap the TRIGGER button to return to scan target mode.