Fluke Ti50 - Manual (Page 34)

Ti40, Ti45, Ti50, Ti55
Users Manual
2-10
Programming Function Buttons
You can assign any of the functions described in Table 2-3 to any one of three
programmable buttons: A, B, C (see Appendix F for a list of default
settings). See programming instructions on the next page.
Table 2-3. Programmable Functions
Centerpoint/Centerbox—Used to cycle the centerpoint on, then
centerpoint and centerbox on, then the centerpoint and centerbox
both off.
Zoom—Used to quickly cycle between 2x, 4x, 8x zoom, and normal
display settings (zoom options vary by camera model; see
Appendix D).
Brightness—Used to quickly cycle through the display screen
brightness settings: “Dim,” “Normal,” and “Bright.” Each time you
press the function button, the next setting takes affect.
Annotation—Used to quickly access the image annotation editor
(available on Ti45 and Ti55 models only).
Browse Images—Used to immediately recall the last saved or last
viewed image.
Browse Thumbnails—Used to quickly browse thumbnails of images
stored on the CompactFlash memory card.
Palette Visible—Used to quickly cycle the color palette bar on or off
the display screen.
Marker Toolbar Visible—Used to show or hide the marker toolbar
for adding extra visible marker points or areas to the image and
displaying temperatures near them.
Torch—Used to quickly switch the LED light on or off (IR Fusion
models only). When on, light shines continuously to brighten up dark
work areas; light automatically times out after 60 seconds.