Fluke Ti50 - Manual (Page 28)

Ti40, Ti45, Ti50, Ti55
Users Manual
2-4
Table 2-1. Camera Parts--Descriptions
A
Mouse controller—Used to control the pointer position in images and
text menus.
B
E button—Performs mouse click, or “enter” function, for
the pointer.
C
F button—Used to access display screen menus. Note: Tap F once
and a popup menu appears.
D
A Programmable function button—Can be programmed to perform
different menu functions, see Programming Function Buttons later in this
Chapter.
E
B Programmable function button—Can be programmed to perform
different menu functions, see Programming Function Buttons later in this
Chapter.
F
C Programmable function button—Can be programmed to perform
different menu functions, see Programming Function Buttons later in this
Chapter.
G
D button—Used to power camera on and off and to place the camera
in a low-power standby mode to conserve battery power.
Solid green = power is on; Blinking green = standby mode enabled.
H Auxiliary power port—Connection port for AC to DC power adapter.
I
Reset—Hidden switch to reset camera. Can be accessed with a paper
clip. See, Appendix B—Troubleshooting.
J Battery latch—Used to remove battery.
K
Liquid Crystal Display (LCD) screen—Sunlight-readable color display
for viewing images and accessing camera menu functions.
L
G LEVEL & SPAN button—Used to rescale the color palette to the
maximum and minimum temperatures in current image and to adjust IR
Fusion level.
M Infrared lens—Infrared Germanium lens with manual focus.
N
Torch/Flash—When enabled, the torch illuminates darker work areas.
When enabled, the flash lights the target object during image capture for
better-quality visible light images. The torch and flash can be enabled at
the same time.