METRObility Optical Systems 8124-01-M - Manual (Page 55)

Managing Through the Mini Console 55
3. You are prompted to enter the password.
4. Enter the password. The console is unlocked.
Network Configuration
The Network Configuration menu allows setting the hub’s IP Address,
Subnet Mask and Default Gateway. The hub’s Network Configurations
must be set to compatible settings with LAN configurations to make
connections to the hub.
Network Configuration
Configuration Default
IP ADDRESS 000.000.000.000
SUBNET MASK 000.000.000.000
DEFAULT GATEWAY 000.000.000.000
IP Address Configuration
1. Select “UNIT CONFIG” and press <Enter>.
2. Press <Next> until “NETWORK CONFIG” displays in the
Message Zone.
3. Press <Enter>. IP ADDRESS displays in the message zone.
4. Press <Enter>. The current IP address displays in the IP
address configuration menu. The first digit is blinking.
NOTE: The IP address is too long to be fully displayed and
it moves to the left as digits are entered.