METRObility Optical Systems 8124-01-M - Manual (Page 72)

72 CenturyStack 8100 Managed Hub
Serial Port Configuration
The Serial Port Configuration Menu is used to configure Console Mode
connections to a VT-100 terminal emulator and Out-of-Band serial
connections to a modem.
Console Mode
To view the Console Mode settings, select “Console” Mode in the Serial
Port Configurations. Console Mode settings are read only. Use the
settings as shown below.
Console Operation Mode
Out-of-Band Mode
Out-of-Band mode enables setting up serial port configurations for
making a connection to the hub using a modem.
To make Out-of-Band serial connections use the Out-of-Band operation
mode in the Serial Port Configurations Menu shown on the next page.