METRObility Optical Systems 8124-01-M - Manual (Page 76)

76 CenturyStack 8100 Managed Hub
Trap Receiver Setup
Traps are messages sent across the network to an SNMP Network
Manager. These messages alert the network manager for network manage-
ment purposes. You can set up six trap receivers.
You can configure the following:
Community Name: The authorized SNMP community string
of the remote network manager. (maximum 16 characters)
IP Address: The IP Address of the remote network manager
station to which traps should be sent.
Status: A community name can be active or inactive.
Community names that are set to active receive traps.
Trap Receiver Setup