Ip address, Ip address shift left – METRObility Optical Systems 8124-01-M User Manual
Page 56
56
CenturyStack 8100 Managed Hub
IP Address
5. Press <Prev> to increase the digit (“0” ~ “9”).
NOTE: Use “0” for a blank space, for example: entering
“000” equals “0” or entering “022” equals “22”.
6. Press Enter to set the digit and move the cursor to the next
digit. The current digit is blinking.
7. Repeat steps 1 & 2 until the entire IP address is entered.
8. Press <Enter> to confirm.
Since the Message Zone can not contain the whole IP address, the digits
will shift to the left to make room for the last digits. When setting the IP
address is complete, the system will validate the IP address. If the IP
address is valid, the display will show the IP address, and the system will
apply the setting. Otherwise, the system will reject it, and a message
“INVALID IP” displays for a few seconds, and the invalid IP address
displays again to allow modification to it.
ID
Master
WWW
SNMP
O-O-B
10
20
40
1
3
5
80
K % 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
G-A
G-B
G-C
G-D
IP Address shift left
ID
Master
WWW
SNMP
O-O-B
10
20
40
1
3
5
80
K % 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
G-A
G-B
G-C
G-D