METRObility Optical Systems 8124-01-M - Manual (Page 85)

Master Hub Configuration & Console Management 85
Repeater Port Control/Status
The Repeater Port Control/Status displays status information for each
port, of each linked repeater, and allows enabling/disabling, setting the
speed, and enabling/disabling link status change notification for ports.
Repeater Port Control/Status
The Repeater Port Control/Status menu provides information about the
hub’s port status. A hub can be selected with the PREV GROUP and
NEXT GROUP commands and its ports selected with the PREV PORT
and NEXT PORT commands. The selected port state can be configured.
Group Number: The CenturyStack ID assigned to the hub in
the stack. (1 to 6)
Port Number: The port number (1~24) of the hub specified in
the Group Number.
Port Status: Displays the current read only settings.