METRObility Optical Systems 8124-01-M - Manual (Page 57)

Managing Through the Mini Console 57
Subnet Mask
Select the SUBNET MASK option and follow the same procedure for
setting an IP Address.
Default Gateway
Select the DEFAULT GATEWAY option and follow the same procedure
for setting an IP Address.
Out-of-Band Configuration
You can set the Out-of-Band configuration with the EIA232 Config
Menu, which allows setting the baud rate for the EIA232 port. Possible
baud rates are 2400, 4800, 9600, or 19200.
1. Scroll to UNIT CONFIG and press Enter.
2. Scroll to EIA 232 CONFIG and press <Enter>.
3. Scroll to BAUD RATE and press <Enter>.
4. Press <Next> until the baud rate that you want to set
displays in the message zone.
5. Press <Enter> to set the new baud rate. An “*” appears
before the set baud rate.
6. Press <Next> until BACK displays in the message zone.
7. Press Enter to move back up the menu tree one level.
Securing the Hub
The hub can be secured with the use of a password and the console lock.
When it is locked, no configuration settings can be made, a lock icon
displays in the Mini Console panel and it can only be unlocked by
entering the correct password. The default password is “0000”.
Setting the Password
The current password displays in the password setting menu. The pass-