METRObility Optical Systems 8124-01-M - Manual (Page 73)

Master Hub Configuration & Console Management 73
Out-of-Band Operation Mode
Baud Rate: The baud rate can be configured as one from
2400bps, 4800bps, 9600bps, 19200bps. The default is 9600.
Character Size: 8 bits character size
Parity: No parity.
Stop Bits: 1 stop bit
Select <Save> to retain the new configuration. The new configuration
takes effect if Out-of-Band management is enabled.
When SLIP is enabled, the EIA 232 port can be used for SLIP only. The
EIA 232 port cannot be used to gain access to a management session via
VT100 terminal emulation. If the SLIP connection is malfunctioning, you
can disable SLIP by rebooting and pressing <Enter> when the Abort
message appears. The message will appear for only 10 seconds. OOB also
appears on the lower right side of the Mini Console. You can also
establish a Telenet session and modify the serial port configuration.