MicroNet Technology SP5001/S - Manual (Page 16)

15
2. Web Configuration with FXS Introduction
2.1 Accessing the Web Configuration
The embedded web configuration allows you to use a web browser to manage
SP5001/S.
You will need a computer with and Ethernet 10BaseT, 100Base-TX Network Interface
Card (NIC). Connect to the LAN port in the FXS.
Use Internet Explorer 5.5 and later or Netscape Navigator 6 and later versions.
Use the following instructions to login on to the web configuration.
Step 1. Start your web browser.
Step 2. Launch your web browser and enter “10.1.1.3” (the default IP address of
SP5001/S) in the Location or Address field. Press Enter.
Step 3. The Password screen now appears. Type “root” in the user name field (it
may display automatically for you) and your password (default “Null”) in the
password field.
Step 4. Click OK.
Figure 1. Login Screen
Step 5. After a successful login, you will see the welcome screen show next.
2.2 Welcome Screen
This is the web configuration welcome screen. Click a link on the navigation panel to
go to the corresponding screen.