MicroNet Technology SP5001/S User Manual
Page 56
55
Expires:3600
Registering to: Sip:80.248.33.37 with the following :
To:sip:[email protected]
From:sip:[email protected]
Contact:sip:[email protected]
Expires:3600
Account: sipcenter1123 registration succeeded
Account: sipcenter1165 registration succeeded
AC4804[0] is ok
successful
Initialize OSS libraries...OK!
VP v1.40 stack open successfully.
login:
19.4.2
Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the proxy
server. When in Peer-To-Peer mode, SP5001/S will send INVITE message
directly to the destination IP address once the dial is finished. One can use
PhoneBook, which will dial predefined phone number, and press “#” (optional,
to accelerate the dial) as end of dial. Or, users can use SpeedDial button,
which is mapping to user defined PhoneBook, Button1 to PhoneBookIndex1,
and Button2 to PhoneBookIndex2… etc..
To configure Peer-To-Peer Mode in SP5001/S, follow the steps below:
Step 1.
Set Peer-To-Peer Mode, using “h323” command
usr/config$ sip – mode 0
Note: mode 0 is for Peer-To-Peer mode, while mode 1 is for Proxy mode.
Step 2.
Configure PhoneBook, using “pbook” command.
Users can refer to chapter 19.7.9 [pbook] command for more information.
usr/config$ pbook – add name TEST1 ip 10.1.1.1 e164 10