MicroNet Technology SP5001/S User Manual
Page 57
56
Note: The command is to add a record onto PhoneBook. After the command
completed, you can type “pbook –print” to see if the input record is correct.
When adding a record to Phone Book, users do not have to reboot the
machine, and the record will be effective immediately. For phonebook
configuration, please refer to Chapter 19.7.9.
19.4.3
Behind IP-Sharing Mode
One Set of SP5001/S
The function is for user whose network environment is behind IP Sharing
device. It is said SP5001/S is connected to the IP Sharing device (Router).
An example such as ADSL network is in the following.
1.
The WAN IP Address obtained from ADSL has two kinds of methods.
One is fixed IP Address, while user applies for one or more fixed IP
Addresses. Another is dynamic IP Address while user applies for dial-up
connection way.
2.
The LAN IP Address of User’s PC can be set as DHCP client in order to
gain an valid one.
3.
One can also assign a fixed IP address which belongs to the same
network segment as the LAN interface of IP Sharing device.
4.
SP5001/S must enable the IP Sharing function for the fixed / dynamic
WAN IP Address.