MicroNet Technology SP5001/S - Manual (Page 23)

22
Please see following for example:
>Advanced setting > NAT setting > DMZ Host setting
DMZ Host setting
Activate DMZ
DMZ Host IP :
. . .
Step 1. To configuration the IP address of SP5001/S for IP Sharing Mode, click
Network Interface on the navigation panel. In the Network Interface screen,
enter the IP address, Subnet mask and the default gateway in the network
table. Please follow up your IP Sharing device
Step 2. Enable the IP sharing function and put the static IP address in the IP
Sharing server address (e.g. 210.11.22.33) and click the OK button.
Figure 8. Enable the IP sharing function