MicroNet Technology SP5001/S - Manual (Page 85)

84
19.7.18 [rom]
ROM file information and firmware upgrade function.
usr/config$ rom
ROM files updating commands
Usage:
rom [-print] [-app] [-boot] [-dsptest] [-dspcore] [-dspapp]
-s TFTP/FTP server ip -f filename
rom -print
-print show versions of rom files. (optional)
-app update main application code(optional)
-boot update main boot code(optional)
-boot2m update 2M code(optional)
-dsptest update DSP testing code(optional)
-dspcore update DSP kernel code(optional)
-dspapp update DSP application code(optional)
-s IP address of TFTP/FTP server (mandatory)
-f file name(mandatory)
-method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)
-ftp specify username and password for FTP
Note:
This command can run select one option in 'app', 'boot',
'dsptest', 'dspcore', and 'dspapp'.
Example:
rom -method 1
rom -ftp vwusr vwusr
rom -app -s 192.168.4.101 -f app.bin
usr/config$
Figure 66. rom command list
Parameter Usages:
-print show versions of all rom files
-app, boot, boot2m, dsptest, dspcore, dspapp to update main Application
program code, Boot code, DSP testing code, DSP kernel code, or DSP
application code.
Most of all, the Rom file needed to get upgrade is App or Boot2m. Please
check the exactly Rom file before doing download procedure.
-s to specify TFTP server’s IP address when upgrading ROM files.
-f to specify the target file name, which will replace the old one.
-method to decide using TFTP or FTP as file transfer server. “0” stands for
TFTP, while “1” stands for FTP.
-ftp if users choose FTP in above item, it is necessary to specify pre-defined
username and password when upgrading files.