MicroNet Technology SP5001/S - Manual (Page 78)

77
19.7.13 [security]
This command is used to configure the account information included
username and password obtained from the service provider
usr/config$ security
Security information and configuration
Usage:
security [-name username] [-pwd password]
security -print
-print Display system account information and configuration.
-line Specify which line number you want to set the account.
-name Specify user name.
-pwd Specify password.
Example:
security -line 1 -name 1001 -pwd 1001
usr/config$
Figure 56. security Command List
Parameter Usages:
-print print current setting in security command.
-line Specify which line number you want to set into the account
Note: If you have only one account, you can set into line1 using
this parameter. For example, if you set the account into line1,
line1 can accept incoming calls.
-name Specify the username of your account information.
-pwd Specify the password of your account information.
usr/config$ security -print
Line1 account information
Username : 1001
Password : nil
usr/config$
Figure 57. security –print command list