MicroNet Technology SP5001/S - Manual (Page 27)

26
4. Making a VoIP Call
This Chapter covers the basic configuration the gateway for making VoIP calls. One is
the Peer-to-Peer mode, another is Proxy routed mode. The configurations and
functions are different. Please make sure about the mode you want and follow up the
step to configure your gateway.
4.1 Configure the gateway into the Peer-to-Peer mode
Step 1. To Configuration the SIP Configuration of SP5001/S, click SIP Information
on the navigation panel. In the SIP Information screen, select Peer-to-Peer
Mode function, set line number (e.g. Line1 Number: 60927) and click the
OK button.
Figure 9. SIP Configuration – Peer to Peer mode Screen
Step 2. To configuration the Phone Book of SP5001/S, click Phone Book on the
navigation panel. In the Phone Book screen, enter the Index, Name, IP
address and e164 (phone number) of the destination and click the Add
Data button.