MicroNet Technology SP5001/S - Manual (Page 77)

76
of the registration information.
-port SIP local UDP port which uses to listen incoming SIP Messages.
-rtp Specify the RTP received port number.
Note: One will need to configure port and rtp parameters only
when you deploy two or more sets behind the IP sharing device.
usr/config$ sip -print
Run Mode : PROXY MODE
Proxy address : 10.1.1.2
Proxy port : 5060
Domain : null
Prefix string : null
Line1 : 1001
SIP listen port : 5060
RTP receive port : 16384
Expire : 3600
usr/config$
Figure 55. sip –print command list