MicroNet Technology SP5001/S - Manual (Page 18)

17
LABEL DESCRIPTION
Flash Clean This link takes you to a screen where you can click flash memory
information and configuration.
Commit Data This link takes you to a screen where you can click save your changes to
the non-volatile memory.
Reboot System This link takes you to a screen where you can click to reboot SP5001/S.
2.3 Saving Your Configuration
Click OK to save your changes back to volatile memory. SP5001/S loses these
changes if it is turned off or loses power, so use the Commit Data link on the
navigation panel to the left to save your changes to the non-volatile memory when your
are done configuring.
2.4 Navigating the Web Configuration
The web configuration uses one level. For example, to configure Network Interface,
click the link on the navigation panel to open the configuration screen.
Figure 3. Network Interface Screen