MITSUBISHI ELECTRIC MOTION CONTROLLERS Q172DCPU - Manual (Page 122)

4 - 31
4 AUXILIARY AND APPLIED FUNCTIONS
(4) Network configuration which MELSECNET/10(H), Ethernet, CC-
Link, RS-422/485 were mixed
(a) When the MELSECNET/10(H) or Ethernet is defined as "Network" and CC-
Link or RS-422/485 is defined as "Link", combination of whether to be able
to access from the programming software packages (GX Developer,
MT Developer, etc.) is shown below.
Network communications
Usable/
unusable
Programming software package CPU (C24) Network Link CPU
Programming software package CPU (C24) Link Network CPU
Programming software package Network Link CPU
Programming software package Link Network CPU
Programming software package CPU (C24) Network Link Network CPU
Programming software package CPU (C24) Link Network Link CPU
Programming software package Network Link Network CPU
Programming software package Link Network Link CPU
: Usable : Unusable
(b) It can be accessed to 8 network points by setting the routing parameter in
the "Network".
(c) Because routing cannot access, it can access only the connected network.
The connected network can be selected by specifying the I/O No. of the
module.
RS-232 USB/
RS-232
C24
MNET
Ether : Serial communication module
: MELSECNET/10(H)
: Ethernet
<Example 1>
Network No.1
Personal computer
Q173D
CPU C24 MNET
or
Ether
QnUD(H)
CPU
Personal
computer
MNET board or Ether
Personal
computer
Network
No.2
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU C24 Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Network No.3
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU CC-Link Q173D
CPU CC-Link QnUD(H)
CPU
Network No.5
C24
CC-Link CC-Link
: Communication is possible
: Communication is possible (Setting of the routing parameter is necessary.)
: Communication is impossible
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU
RS-422/485
RS-422/485
Network No.4
RS-422/485