MITSUBISHI ELECTRIC MOTION CONTROLLERS Q172DCPU - Manual (Page 119)

4 - 28
4 AUXILIARY AND APPLIED FUNCTIONS
4.7.2 Access range of the communications via network
(1) Network configuration via the MELSECNET/10(H) or the Ethernet
(a) It can access the other CPU via the network from the programming software
packages (GX Developer, MT Developer, etc.) of the personal computer
connected with the CPU or serial communication module in USB/RS-232.
(b) It can access the other CPU via the network from the programming software
packages in the personal computer by connecting the personal computer
equipped with Ethernet to MELSECNET/10(H) or Ethernet board to the
Ethernet to MELSECNET/10(H) or Ethernet.
(c) The access range of above (1) and (2) can be accessed to 8 network points
by setting the routing parameter to the control CPU of the network module
and the CPU which connected the personal computer.
RS-232 USB/
RS-232
: Communication is possible
: Communication is possible (Setting of the routing parameter is necessary.)
: Communication is impossible
C24
MNET
Ether : Serial communication module
: MELSECNET/10(H)
: Ethernet
<Example>
Network No.1
Personal computer
Q173D
CPU C24 MNET
or
Ether
QnUD(H)
CPU
Personal
computer
MNET board or Ether
Personal
computer
Network
No.2
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Network No.3
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Q173D
CPU MNET
or
Ether
QnUD(H)
CPU Q173D
CPU MNET
or
Ether
QnUD(H)
CPU MNET
or
Ether
Network
No.6
Network
No.10
Network No.5
Network No.7
Network No.9
Network No.4
Network No.8