MITSUBISHI ELECTRIC SDP-Eco 1630 III - Manual (Page 12)

1.2 Warning labels and attachment positions
Warning labels are attached to dangerous parts or areas of the machine. All
operators and maintenance personnel must follow the instructions written on
these labels.
-
Do not remove or deface any of these warning labels.
- Labels must always be clearly visible without any obstacles shielding or
obscuring them.
- If a label is removed or defaced, replace it with a new warning label as
soon as possible. Please contact the dealer where you purchased this
machine for new labels.
• Types of warning labels
Hazard Safe handling method
Contains processing
chemicals. Direct contact
with these chemicals due
to splashing or overflow
may result in skin.
irritation, blindness, or
burns.
Always wear protective gear such as safety glasses,
rubber gloves, masks, and rubber aprons.
Read all instructions and warnings for processing
chemicals.
Hazard
Hands or fingers may get
caught. Keep hands, fingers and the rest of the body away
during operation. Always turn OFF the main power
supply and the power switch on the machine before
approaching.
Sections marked with this
label contain functions or
components which could
cause personal injury. Keep hands, fingers and the rest of the body away
from the machine while it is running. If you must
physically touch the machine, always turn the
power supply OFF beforehand.
Safe handling method
Safe handling method Hazard
SDP-Eco1630 III USERS MANUAL
- 4 -
Chapter 1 On Safety
(1) Caustic
agent
(2) Hazardous
Moving
Section
(3) Caution