MITSUBISHI ELECTRIC SDP-Eco 1630 III - Manual (Page 3)

i
Warning
For Your Safety
- This manual must be thoroughly read and understood by all operators before they attempt
to use SDP-Eco 1630 III.
- This manual provides general guidelines, precautions and warnings for the safe operation
of this machine. Very serious accidents may occur if this machine is utilized without
following this manual and we shall bear absolutely no liability or responsibility for the
consequences.
- The warning labels for hazard prevention area attached to dangerous parts or areas of
the machine. Study and understand all the specific dangers involved and how they can
be avoided.
- Keep this manual available and near the machine at all times so that it can be
immediately referred to whenever necessary.
- Look up the name, address and phone number of our nearest dealer or branch office
(listed on the back page of this manual), and post the information prominently for quick
reference.
- Please make sure that this manual reaches everyone charged with operating this
machine.
Machine operators must thoroughly read Chapter 1. Do not turn on the machine's power
supply until all of the precautions have been read and understood. Very serious
accidents may occur if this instruction is not observed.
Administrators and supervisors shall not instruct anyone to operate or inspect the SDP-
Eco 1630 III unless he/she is familiar with all the contents of this document.