MITSUBISHI ELECTRIC SDP-Eco 1630 III - Manual (Page 4)

Compliance with CISPR Rules
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Compliance with FCC Rules
Notice for the USA
This machine has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the machine is operated in a
commercial environment. This machine generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this machine in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
Changes or modifications not expressly approved by Mitsubishi Paper Mills Limited could
void the user's authority to operate the machine.
Notice for Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Unit Regulations.
Cet appareil numérique de la Class A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
When export the machine
International transfer of this product, any of its parts, components and/or software must be
carried out in compliance with the relevant laws and ordinance of the country of export and
the country of product end-use. We do not assume any responsibility of liability for product
transferred without regard to proper export/import regulations or procedures.
Limit of responsibility
Please note that machine specifications are subject to change without notice for updates and
improvements. This may cause inconsistencies between the contents of this manual and
the machine you currently possess.
We shall not be held responsible for any damage caused by conditions beyond our control
such as customer modification, disassembly or misuse of our machine, programs or
software, or their use in a defective or deficient environment.
We assume no responsibility or liability for any damage or consequential and/or indirect
losses resulting from any accident or malfunction that might occur during the operation of
this machine.
Copyright
©2005: Mitsubishi Paper Mills Limited.
The copyright for this entire manual belongs to Mitsubishi Paper Mills Limited.
Copying, reprinting, or reproduction of this manual in whole or in part in any medium without
our express consent infringes upon the copyright and the rights of the publisher.
ii