MGE UPS Systems EX 7RT User Manual

Page 11

Advertising
background image

Installation and User Manual

Figures

(continued)

figure description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page

3-1:

Initial Startup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 1

3-2:

Control Panel with scroll up and down buttons. . . . . . . . . . . . . . . . . . . .3 — 2

3-3:

Configuration used to provide full redundancy (2N) to critical loads. . . .3 — 3

3-4:

Normal (double conversion) mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 5

3-5:

ECO mode display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 6

3-6:

Transfer, Threshold and End of backup time. . . . . . . . . . . . . . . . . . . . . .3 — 7

3-7:

Shutdown display, circuit breaker, and AC source switch. . . . . . . . . . . .3 — 8

4-1:

Disconnecting the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 4

4-2:

Reconnect the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 5

4-3:

Rear view of the battery module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 6

5-1:

Power supplied as a function of input voltage (left), and
Permissible UPS overloads as a function of time (right). . . . . . . . . . . . . .5— 1

Tables

table

description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page

1:

EX RT Model Descriptions and Contents . . . . . . . . . . . . . . . . . . . . . . . .1 — 2

2:

Optional Accessories (See section 1.5 for description) . . . . . . . . . . . . .1 — 3

3:

Power Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4

4:

Battery Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4

5:

Battery backup time chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 12

3-1:

Local Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3

3-2:

Output features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3

3-3:

ON/OFF features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4

3-4:

Battery features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4

4-1:

Network and Industrial Modes of Operation. . . . . . . . . . . . . . . . . . . . . . .4 — 1

4-2:

Troubleshooting not requiring MGE after-sales support. . . . . . . . . . . . . .4 — 2

4-3:

Troubleshooting requiring MGE after-sales support. . . . . . . . . . . . . . . . .4 — 3

5-1:

EX 5/7/11 RT Input and Output Characteristics. . . . . . . . . . . . . . . . . . . .5 — 1

5-2:

Back-up Time ( in minutes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 1

5-3:

Battery Recharge time to recover 90% of the rated backup time
after discharge at full load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2

5-4:

Full load heat rejection in BTU’s/hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2

Contents

c v

86-86000-00 A01

Advertising
This manual is related to the following products: