MGE UPS Systems EX 7RT - Manual (Page 20)

1.5 Optional Accessories
Optional Accessories describes the options available for upgrades and enhancement of the EX 5/7/11RT system.
Detailed installation of the unit is described in following sections.
To ensure a successful installation, all procedures should be followed in their correct sequence. Note that any
unauthorized installation may cause damage to the UPS(s) and void the MGE warranty.
1.5.1 Power Module Rail Kit
(Part Number 86001)
This kit is for rack mounting the power module in a 19" enclosure. See section 2.6 for rack installation of power
module.
Figure 1-7: Power Module Rack Mounting Kit.
Front mounting brackets.
Rear support brackets, part number
86013.
Telescopic rails, 695 mm to 1015 mm
length (27.36" to 39.96").
Input/Output Box bracket system, part
number 86012.
1.5.2 Battery/ Transformer/CLA Module Rail Kit
(Part number 86002)
This kit is for rack mounting of the battery/step-down transformer/CLA module in 19" enclosure. See section 2.6 for
rack installation of power module.
Figure 1-8: Telescopic rails for the Battery/Transformer/CLA module Rack mounting.
Front mounting brackets.
Rear support brackets, part number
86013.
Telescopic rails, 695 mm to 1015 mm
length (27.36" to 39.96").
26
25
24
27
26
25
24
EX 5/7/11 RT System
Introduction 1 — 8 86-86000-00 A01
24 25
26
27
24 25
26