Motorola SSETM 5000 - Manual (Page 90)

November 11, 2004 6881094C12-A
7-8 Disassembly/Reassembly Procedures: Disassembly/Reassembly Procedures for Accessories
4. Re-install the baseplate assembly in the housing assembly (complete up to Step 5. in Section
7.7.4: “Reassemble the Housing Baseplate” on page 7-17 ).
Figure 7-4. Attaching the Belt Clip
7.4.3.2 Remove the Belt Clip
1. With the battery removed, remove the baseplate assembly from the housing assembly
(complete up to Step 5. in Section 7.6.4: “Disassemble the Housing Baseplate” on page 7-
14 ).
2. Lift the belt clip up and away from the radio.
3. Re-install the baseplate assembly in the housing assembly (complete up to Step 5. in
Section
7.7.4: “Reassemble the Housing Baseplate” on page 7-17 ).
Figure 7-5. Removing the Belt Clip
HOOK TOP SLOT
BOTTOM
SLOT
BELT
CLIP