Reaching, leaning and, Bending - forward – Invacare TDX SP User Manual
Page 24
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS
24
A Note to Wheelchair Assistants
When assistance to the wheelchair user is required, remember to use good body
mechanics. Keep your back straight and bend your knees whenever tilting wheelchair or
traversing curbs or other impediments.
Also, be aware of detachable parts such as arms or legrests. These must NEVER be used
to move the wheelchair or as lifting supports, as they may be inadvertently released,
resulting in possible injury to the user and/or assistant(s).
When learning a new assistance technique, have an experienced assistant help you before
attempting it alone.
Reaching, Leaning and
Bending - Forward
ƽ WARNING
DO NOT attempt to reach objects if
you have to move forward in the seat or
pick them up from the floor by reaching
down between your knees.
NOTE: For this procedure, refer to
FIGURE 3.2.
Position the casters so that they are
extended away from the drive wheels and
engage wheel locks/motor locks/clutches.
FIGURE 3.2 Reaching, Leaning and Bending