Specifications, Securing the wheelchair to the vehicle, Positioning the wheelchair in the vehicle – Invacare TDX SP User Manual

Page 66

Advertising
background image

SECTION 11—TRANSPORT READY PACKAGE (TRRO)

TDX™ SP

66

Part No 1143190

Specifications

Securing the Wheelchair to the Vehicle

Positioning the Wheelchair in the Vehicle

ƽ WARNING

This wheelchair must be in a forward facing position during travel in a motor

vehicle.
The recommended clear zones for wheelchair seated occupants restrained by

BOTH pelvic and upper-torso belt(s) and ONLY by a pelvic belt are shown in the

diagrams and described below.
Frontal Clear Zones (FCZ) need to be

LARGER when upper-torso belt(s) are

NOT used.
The rear clear zone of 16-inches is

measured from the rearmost point on

an occupant’s head.
The frontal clear zone is measured from

the frontmost point on an occupant’s

head and is 26-inches with pelvic and

upper-torso belt(s) and 37-inches with

ONLY a pelvic belt.
The frontal clear zone may not be

achievable for wheelchair-seated

drivers.
The estimated seated height (HHT)

from the ground or floor to the top of

the wheelchair-seated occupant’s head

ranges from approximately 47-inches

for a small adult female to about 61-

inches for a tall adult male.

MODEL

MOTOR

WHEELCHAIR WEIGHT LIMIT

ADULT

JUNIOR

TDX SP HD

4 Pole HD

Up to 400 pounds

N/A

TDX SP

4 Pole

Up to 300 pounds

Up to 150 pounds

16 in.

Frontal Clear

Zone

Side View

Top View

HHT

FCZ

Frontal Clear Zone

16 in.

8 in.

8 in.

Advertising