Mpj+ joysticks – Invacare TDX SP User Manual
Page 47
SECTION 5—WHEELCHAIR OPERATION
47
ƽ WARNING
The excess joystick cable must be
coiled, and tie-wrapped to the rear of
the seat frame to ensure that cable does
NOT become entangled or damaged
during normal operation of seating sys-
tem - otherwise injury or damage may
result.
3. If necessary, coil and tie wrap excess
joystick cable to rear of seat frame.
FIGURE 5.11 Disconnecting/Connecting
the Joysticks - SPJ+ Joysticks
MPJ+ Joysticks
NOTE: For this procedure, refer to FIGURE 5.12.
Disconnecting
1. Pull the latch away from the joystick
connector.
2. Disconnect the joystick connector from
the remaining connectors.
Connecting
1. Ensure the latch is pulled away from
the joystick connector.
2. Connect the joystick connector to the
other connectors.
3. Push the latch in to secure the joystick
connector to the other connectors.
FIGURE 5.12 Disconnecting/Connecting
the Joysticks - MPJ+ Joysticks
Joystick
Connector
Light Grey Collar
Controller
Connector
Joystick
Connector
Latch
Other Connectors