Section 6—motor locks, Disengaging/engaging motor lock levers, Refer to – Invacare TDX SP User Manual

Page 48

Advertising
background image

SECTION 6—MOTOR LOCKS

TDX™ SP

48

Part No 1143190

SECTION 6—MOTOR LOCKS

ƽ WARNING

After ANY adjustments, repair or service and before use, make sure that all

attaching hardware is tightened securely - otherwise injury or damage may result.

CAUTION

As with any vehicle, the wheels and tires should be checked periodically for cracks

and wear, and should be replaced.

Disengaging/Engaging Motor Lock Levers

ƽ WARNING

DO NOT engage or disengage motor locks until the power is in the OFF position.

NOTE: For this procedure, refer to 
FIGURE 6.1.

NOTE: Motor lock disengagement/
engagement allows free‐wheeling or joystick 
controlled operation. Free‐wheeling allows an 
assistant to maneuver the wheelchair without 
power.

NOTE: Motor lock levers are located between 
the rear caster assembly and drive wheel on 
both sides of the wheelchair. 

1. Perform one of the following 

(FIGURE 6.1):

• Disengage (PUSH) ‐ Push motor 

lock levers down.

• Engage (DRIVE) ‐ Pull motor lock 

levers up.

FIGURE 6.1 Disengaging/Engaging Motor

Lock Levers

Motor Lock Lever

ENGAGE (Drive)

Motor Lock Lever

DISENGAGE (Push)

Outside of

Wheelchair

Motor Lock Lever

Rear Caster

Assembly

Drive

Wheel

Advertising