Juniper Networks ERX Hardware 8 User Manual
Page 142
ERX 8.0.x Hardware Guide
Category
Specification
Electromagnetic Emissions Agency Certification
AS/NZS 3548:1995 (CISPR 22 Class A)
EMC Directive (89/336/EEC)
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance
Criteria A, B, and C
ETSI 300-386, Telecommunication Network
Equipment; ElectroMagnetic Compatibility (EMC)
requirements
FCC Part 15 Class A
IECS-003 Issue 3 Class A
VCCI (Voluntary Control Council for Interference by
Information Technology Equipment)
Telecommunications Certification
ACA TS 016-1997
CTR13 – Commission Decision of 9 July 1997 on
a common technical regulation for attachment
requirements for terminal equipment interface for
connection to 2048 kbit/s digital structured ONP
leased lines: 97/521/EC – OJ No. L215 Vol. 40,
August 1997
CTR24 – Commission Decision of 9 September 1997
on a common technical regulation for attachment
requirements for terminal equipment interface for
connection to 34 Mbit/s digital unstructured and
structured leased lines: 97/639/EC – OJ No. L271
Vol. 40, 3 October 1997
FCC PART 68
IECS-003 Issue 3 Class A
PD7024 – Essential requirements for terminal
equipment intended for connection to
unstructured digital leased circuits of the public
telecommunications network using a CCITT
recommendation G,703 interface at a rate of 2048
kbit/s with a 75 ohm unbalanced presentation, 1994
RTTE Directive (1999/5/EEC)
124
ERX-7xx Models Specifications