Juniper Networks ERX Hardware 8 - Manual (Page 157)

Installation Guidelines and Requirements
FCC Requirements for Consumer Products
This equipment complies with FCC rules, Part 68. On the back side of this
equipment is a label that contains, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN) for this equipment. If requested,
provide this information to your telephone company.
If this equipment causes harm to the telephone network, the Telephone Company
may discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be advised of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of your
equipment. If they do, you will be given advance notice so as to give you
an opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the manufacturer
for warranty/repair information. The telephone company may ask that you
disconnect this equipment from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
Food and Drug Administration, Center for Devices and Radiological Health
This equipment complies with 21 CFR 1040.10 and 1040.11 for the safe use of lasers.
Canadian Department Of Communications Radio Interference Regulations
This Class B (or Class A, if so indicated on the registration label) digital
apparatus meets the requirements of the Canadian Interference-Causing
Equipment Regulations.
Réglement sur le brouillage radioélectrique du ministère des communications
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur
l’étiquette d’enregistration) respecte toutes les exigences du Reglement
sur le Materiel Brouilleur du Canada.
Industry Canada Notice CS-03
The Industry Canada label identifies certified equipment. This certification means
that the equipment meets certain telecommunications network protective,
operation and safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user’s satisfaction. Before installing
this equipment, users should ensure that it is permissible to be connected
to the facilities of the local telecommunications company. The equipment
must also be installed using and acceptable method of connection. The
customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Hardware Compliance 139