Seiko Group OC CS 6060 IP-6600 - Manual (Page 121)

3-17
Section 3 Operation Panel Menu Operations
ENTRY Menu
This menu is used to set up parameters for drawings.
When the
key is pressed, parameters can be set.
(1) Paper selection (SELECT PAPER)
Select a paper type number to be registered newly or revised.
Twenty types (from 01 to 20) can be selected.
<Parameter (Enter a choice.)>
Paper type number: 01 to 20
(2) Paper name setting (NAME)
Set the paper name.
Six-digit characters (or symbols) can be input as the paper name.
Symbols, alphanumerals, katakanas can be used for six-digit
characters.
<Parameter (Enter characters)>
A six-digit character (symbols, alphanumerals, katakanas, others)
#SELECT PAPER
>01 : TYPE01
PAPER ENTRY
PAPER F.ADJ
Key
#SELECT PAPER
>01 : TYPE01
#NAME
>01 : TYPE01
Menu Operations