Seiko Group OC CS 6060 IP-6600 - Manual (Page 130)

3-26
(22) Cleaning mode
Selects a cleaning mode to be performed automatically daring print.
<Parameter (Enter a value)>
MODE 1: Performs cleaning automatically according to the
print history record at start of the print or at end of
the print.
MODE 2: Performs cleaning automatically in a certain period
during print.
- When the tension winding as the winding mode or syquence
2 as the paper feed mode is selected, the printer works at
mode 1 setting even if the mode 2 is selected.
- When selecting mode 2, a joint of print will be generated
because the cleaning is performed during print.
A joint can be adjusted with correction value input at "BACK
ADJUS" menu.
In case a joint cannot be adjusted, use mode 1.
# CLEANING MODE
>01: MODE 1
NOTE
(21) Reciprocating print position (Right) adjustment value (Bk/Lm/Lc/Y/M/C)
Adjusts reciprocating print positions (Right) for all heads. (I-POS
ADJ YY)
Enter an adjustment value based on the head adjustment pattern
print.
YY: Ink color
Display order:
Bk -> Lm -> Lc -> Y -> M -> C
<Parameter (Enter a value)>
- Sign: +/-
- Value:-32 to +31, A to H (A=0/8, B=1/8...H=7/8)
#I-POS (R) ADJ YY
>01 : +00&A