Seiko Group OC CS 6060 IP-6600 - Manual (Page 49)

2-5
Section 2 Basic Operations
Turning the Power On/Off
The power of the printer and the power of the heater are separated.
<Printer>
The printer has two power switches as follows.
(1) Printer switch
(2) Power ON/OFF switch
The printer is turned ON by turning the printer switch ON.
Afterward, turn the printer ON/OFF by the ON/OFF switch on the
operation panel.
<Heater>
The heater has two power switches as follows.
(1) Heater switch
(2) 100/200 V alternation switch
Printer rear (Right side)
NOTE
- When the printer is connected with the computer, turn the
printer ON, and then turn the computer ON. To turn the
system OFF, turn the computer OFF, and then turn the
printer OFF.
- Turn the computer ON after the printer becomes to the
online state.
(1)
Power receptacle
Printer rear (Left side)
(1)
Power receptacle
(2)
For Heater
100-120V 12A 50/60Hz
(2)
Printer front (Operation panel)