Seiko Group OC CS 6060 IP-6600 - Manual (Page 160)

4-8
# UNIT
* FAHRENHEIT
# EXIT
* YES
# EXIT
* YES
AAAU BBBU CCCU
XXXU YYYU ZZZU
(6) Deciding the setting value.
Display the setting value you desire on the 2nd line.
Press the ON/OFF key on the heater control panel to determine the
setting value.
The display returns to the setup item setting screen.
Note: - # shows blinking
When the setting value you don't desire is displayed on the 2nd
line, press the ON/OFF key on the heater control panel to cancel
the setting value and return to the setup item selection screen.
(7) Exiting from the parameter setting mode.
Move to the last setup item, EXIT menu.
Note: - # shows blinking
Press the ON/OFF key on the heater control panel.
Note: - * shows blinking
Press the ON/OFF key on the heater control panel.