Seiko Group OC CS 6060 IP-6600 - Manual (Page 125)

3-21
Section 3 Operation Panel Menu Operations
(8) Edge guard setting (EDGE GUARD)
Set whether the media edge guard is used or not.
The right and left print margins will be changed by this setting.
<Parameter (Enter a choice)>
- USE : Set when the edge guard is used.
- NOT USE : Set when the edge guard is not used.
(9) Paper feed mode setting (PAPER FEED MODE)
Set a paper feed mode.
<Parameter (Enter a choice)>
- SEQUENCE 1 : Feeds the paper in the normal paper feed
sequence.
- SEQUENCE 2 : Feeds the paper in the counter measure
sequence for paper with glue.
(10) Winder mode (WINDER MODE)
Set a paper winding mode.
<Parameter (Enter a choice)>
- SLACK : Drives the winder with the SLACK rewinding
method.
- TENSION : Drives the winder with the TENSION rewinding
method.
#EDGE GUARD
>01 : USE
#PAPER FEED MODE
>01 : SEQUENCE 1
#WINDER MODE
>01 : SLACK
Menu Operations
sticky/static paper [X-drive motor vibrates]