Seiko Group OC CS 6060 IP-6600 - Manual (Page 157)

4-5
Section 4
Heater Controller Operation
(2) Display at exiting of the heater
When the current is flowed to the heater, the current temperature
unit display C or F is displayed with “+” in the place of unit dis-
play.
The temperature unit is displayed at completion of exiting the heater.
The above display shows the condition that the front heater is exit-
ing.
(3) Display at heater OFF
“OFF” is displayed in the setup temperature display area of the
heater turned OFF.
The temperature unit of the heater turned OFF is not displayed.
The current temperature area is displayed as it is.
(4) Display when heater AC power is turned OFF
“TURN ON HEATER POWER SWITCH” massage is displayed
on the LCD.
AAAU BBBU CCCU
XXX+ YYYU ZZZU
OFF BBBU CCCU
XXXU YYYU ZZZU
TURN ON HEATER
POWER SWITCH
Exiting display