Operating conditions – Seiko Group OC CS 6060 IP-6600 User Manual
Page 22
1-2
Operating Conditions
This section describes the operating conditions for the printer.
Installation Space
There must be a sufficient space around the printer for the
replacement of frequently used parts, for the output of drawings,
and for ventilation. In addition, the maintenance space, shown
below, is required to repair the printer or replace components.
The installation/maintenance space is shown in the following figure.
Installation and maintenance space
Height direction: 1700
(Unit : mm)
400
400
1000
1000
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
1234567890123456789012345678901212345678901234
(Front side)