Seiko Group OC CS 6060 IP-6600 - Manual (Page 53)

2-9
Section 2 Basic Operations
Turning the Power Off
<Printer>
1
Turn OFF the power ON/OFF switch on the operation
panel for a couple of seconds.
The above message is displayed on the LCD to indicate that a
shutdown process is in progress. After the process ends, the power
is turned OFF.
The fill cap (filling ink into the cap unit) is performed automatically
to maintain good head condition at turning off the printer.
Press the
and the ON/OFF keys to skip the fill cap at turning
off the printer.
Performing the fill cap operation is recommended.
- The printer switch on the rear of the printer should be used
only when the printer is turned OFF completely in order to
move it, connect it with a computer, install or maintain its
parts.
- Turn the power ON/OFF switch OFF, wait for at least ten
seconds, then turn it ON again.
- The printer performs fill cap operation to keep the good
head condition at first 20 hours after print wait state and
every 3 days.
It is recommended to keep the printer ON.
SHUTDOWN
WAIT A MOMENT
CAUTION
Turning the Power On/Off
Necessary for Power Supply protection
Fill cap done:
After Printer switched on
and in standby:
- First time after 20 hours
- Then every 3 days
After Printer switched off:
- 1 Time during switch
down procedure