Seiko Group OC CS 6060 IP-6600 User Manual
Page 98
2-54
<Ink Charge After Head Washing>
Charge the ink after head washing before printing when the printer is
leaved for a long time.
Enter to “SERVICE” menu and select “INK CHARGE” on the
operation panel.
#SERVICE
>INK CHARGE
#SERVICE
>HEAD WASH
When returning the printer from a long time leaving (more than 2 weeks)
Perform the cleaning of the head and ink path with cleaning liquid.
Six cleaning liquid cartridges and six dummy cartridges are mandatory.
<Head Wash>
Select HEAD WASH in SERVICE menu on the operation panel.
After performing the head wash, charge the ink (See Ink Charge after
Head Washing).
NOTE
-
The printer performs fill cap operation to keep the good
head condition at first 20 hours after print wait state and
every 3 days.
It is recommended to keep the printer ON except when the
printer is not used for a long time.
Avoid leaving the printer with no ink for one month or more
for head protection.
-
Do not open and close the rear cover and do not lift and
push down the levers during service cleaning and head
washing.
If doing so, the printer may start service cleaning and head
washing from the begining.
Needed is Cleaning kit
3B